How to Reset brother serie HL (TN-450) Toner Cartridges To Clear Toner Errors

Step 1 – Turn off your Brother laser printer or multifunction center.

Step 2 – Open the front cover of your Brother laser printer and make sure it remains that way thorough the whole procedures.

Step 3 – Hold the go button while turning on your Brother laser printer . All LEDs turn on and the Ready LED will turn off.

Step 4 – When the Ready LED turns off, release the GO button. All LEDs will turn off.

Step 5 – Press the GO button 2 times (Toner, Drum, and Error LEDs turn on).

Step 6 – Press the GO button 5 times. All LEDs turn off and then the Error LED will turn on.

Step 7 - When the Error LED stays on, close the front cover.  The Error LED will turn off and the Ready LED will flash briefly.

Step 8 – Verify the Ready LED is on steady and the Toner LED is off. Once your done, you can now resume doing your print jobs.

Brother TN-450 Toner Cartridges Serie (DCP) To clear errors toner

Step 1 - Open front door.

Step 2 - Press Clear.

Step 3 - Press * 0 0 (ignore the drum reset information).

Step 4 - Press OK.

Step 6 - Close front door.

Brother TN-450 Toner Cartridges Serie (MFC) To clear errors toner

Step 1 - Open front door.

Step 2 - Press Clear.

Step 3 - Press Start

Step 4 - Press key down.

Step 5 - Press key up.

Step 6 - Press OK.

Step 7 - Close front door.