Blogue & Help & Store
Brother DR-500, Resetting drum (photoconductor)
Choose for which type of printer you want to perform the drum reset..
| Brother DCP | Brother HL | Brother MFC |
| Read comments | Leave your comment |
Brother
DCP-8020 | DCP-8025D
1 – Open the front cover.
– Press the Delete / Back key.
2 – Press 1 to reset (if your Brother machine does not have a keypad, press the Up Arrow to zero the drum counter)
3 – Close the front cover.
| Read comments | Leave your comment |
Brother
HL-1650 | HL-1650N | HL-1650N Plus | HL-1670N | HL-1850 | HL-1870N | HL-5040 | HL-5050 | HL-5050LT | HL-5070N | HL-8420
1 – Open the front cover.
2 – Press and hold the Go button for 4 seconds until all the LEDs light up.
3 – Once all the LEDs are on, release the Go button.
4 – Close the front cover.
| Read comments | Leave your comment |
Brother
MFC-8420 | MFC-8820 | MFC-8820D | MFC-8820DN
1 – Open the front cover.
– Press the Delete / Back key.
2 – Press 1 to reset (if your Brother machine does not have a keypad, press the Up Arrow to zero the drum counter)
3 – Close the front cover.
| Brother DCP | Brother HL | Brother MFC |
| Read comments | Leave your comment |
Source of information: Service support, Brother & SCC & Uninet & Summit
You must be logged in to your account to post a comment. No account? You only have to create an account without any obligation.